How to Insure Cargo

Cargo insurance is one the most effective methods to decrease transportation risks. However many companies in order to save their money refuse to insure their cargo, and hope that “things will come right “. The experience shows that such saving is risky, because in case if cargo is damaged or lost material losses may be severe.

Miracle movers, Toronto movers advise you to approach seriously cargo transportation. Since company’s financial director is interested in minimization of possible financial losses, he should imagine clearly against what types of risks the transported cargo is insured and which are factors that must be taken into account.

Today miracle movers, Corporate moves will share with you their experience regarding cargo insurance.

What should we take into account in case of cargo insurance?

Company may decide to conclude an insurance agreement at any time before cargo transportation. The conditions of insurance depend on cargo type, route and so on. The main document which stipulates these conditions is the agreement with insurance company.

Types of agreements

Each insurance company works on the basis of license granted by the official body and special document – rules of insurance, which are drawn up by each company. The rules describe types of insurance agreements, which may be concluded by the company, list of insured risks according to each type of the agreements, as well as mode of payment of losses to the insured party. Most of the companies have similar documents, because they are based on the Institute Cargo Clauses elaborated by the Institute of London Insurers. In case of cargo transportation to the other countries, in order to avoid problems with foreign partners the ICC terms are used. Miracle movers, Professional office movers, among others, transport cargos besides the Canada borders. That is why they work only with the most reliable insurance companies.

Types of insurance agreements differ by insured risks:

- “all risks”: insurer bears responsibility for losses caused by cargo damage or full or partial cargo loss, which took place by any cause, except causes stipulated in rules of the insurance company;

- ” with particular average”: the insurance company bears responsibility and undertakes to cover losses caused by cargo damage or full or partial cargo loss, which took place as a result of natural hazard or vehicles crash, as well as in consequence of ship in missing. Some companies, including miracle movers, Toronto movers include in such agreement risk of full or entire cargo theft.

- “free of particular average “: the insurer undertakes the responsibility for losses as a result of full or partial cargo loss caused by natural hazard or vehicles crash, as well as for losses in consequence of ship in missing.

Beside the aforesaid main agreements types insurance companies may conclude agreements of insurance of the allied risks, for example damages, which may appear when during cargo transportation goods cost increases or they are not delivered at all due to the political or other events. However the insurance premium in case of such agreements is rather high. But in case when clients of miracle movers, Corporate moves wish to bear such expenses, company concludes such agreements in their name.

Important clauses

Miracle movers, Professional office movers have experienced lawyers who have a serious approach to the insurance of the client’s cargo. Each insurance agreement, as well as the insurance company rules, contains a list of exception cases when the insurer is not liable. As a rule, to the exception cases refer risks related to:

- acts of war and their consequences;

- bad faith or gross negligence of the insured party or his representative A (violation of transportation conditions stipulated in the agreement).

The insurer also will not pay cargo shortage in case when the package has no visible damages (for example, loss of goods from container with unbroken seals).

In our next article we’ll discuss such crucial points in insurance as term of validity of the insurance agreements, factors which influence the underwriting rate, and how to obtain the insurance.

How Rigs for Water Wells Operate

To find new artesian wells, technology absolutely has to help us. With technical and mechanical innovations together with hydraulic engineering it has been possible to build rigs that are more and more efficient and are able to go to very important depths while drilling even more resistant layers of rocks. An artesian well is an under earth rich reserve of pluvial water: it is about natural resources that are hidden in the earth’s ground, the precious water supply of an area can be more or less extensive. The drilled hole of an artesian well lets water spontaneously come up to surface, without the use of submersible pumps. To find this underground water it is thought necessary to use a rig that is appropriate to our aim. Modern rigs, designed and realized by companies from this sector, are able to drill into the layers of the earth for many hundreds of meters. We are talking about mobile rigs, i.e. mounted on trucks or trailer either big or small depending upon the dimensions and weight of the equipment; this will let us move the rig inside the working yard without too many problems.

The choice of the correct rig to drill water wells is a choice of fundamental importance. Depending upon the well’s depth the rig will need to be more or less powerful. The best way to find the most appropriate rig is to trust and search the internet. You just need to open the browser on Google or Bing pages and type “drilling rigs for sale”. Over the world there are many companies that are operating in the sector of designing and realizing rigs. There are companies that are specialized in building rigs dedicated to water research. Others do have rigs to drill inside mines. Others specialize in oil exploration in the deepest layers of the earth from either marine platforms or on the mainland. There are also bigger companies that offer a wider range of drilling equipment. It is not always necessary to buy a new drilling rig. Most companies suggest and offer to their clients the option to hire and sell used rigs which can be recommended for small works when it’s not necessary to use equipment for a long period.

It is possible to find rigs that are fit for any purpose; it is though important to know that not all rigs are equal. For instance there are mechanical rigs which normally operate by diesel engines. There are electrical drilling rigs powered by energy sources generated in the work place, often they have engines with internal combustion. There are hydraulic drilling rigs that are using hydraulic oil flow operated by diesel engine. The system includes one gear box on which are connected different hydraulic pumps. Moreover modern rigs do differentiate themselves for their drilling method; these rigs can work a percussion system or rotary drilling method. The first ones impact the ground vertically drilling a large diameter hole in the ground; these rigs are mostly used when searching for water at low depths, but with very large diameter. Other types of drilling rigs instead, operate by rotating movement with a specific tool, normally called a bit.

The Most Important Components of Physical Fitness

There are components of physical fitness which insurance companies and trainers take into account as they are significant to the overall evaluation of health. Basically it is similar to a fine-tuning a racing engine, you would never add diesel to an engine that requires high octane.

When physical trainers measure the fitness of a person they use some components of physical fitness to test against a set standard and to develop goals for further improvement. By incorporating these components of physical fitness you can not only improve your health but also lose weight.

The first of these is muscular strength. This measures the ability of the muscle to exert a maximal force through a range of motion or to a given point. This is measured for a short period of time and usually incorporates the use of weights for evaluation.

As muscular strength varies through the body, you might for instance you have
high muscular strength in your arms while having weaker legs, this component is related to the amount and type of exercise that your body undergoes. Weight training or strength training is the only method to improve strength. One principle of increased muscle mass is that that a larger amount of muscle consumes a greater number of calories, even at rest. By increasing mass you effectively increase the amount of calories needed for your body at rest and will reduce your body fat ratio. Another benefit to strength training is that it will help to maintain your bone structure and decrease your risk of osteoporosis.

The second component is muscular endurance. This reflects to your muscles ability to work through a range of motion over a specific amount of time. This can be measured by the ability to hold a weight for a specific amount of time – say 20 pounds over-head for 5 minutes. Many times this component is measured through push-ups as these are exercises that exert a specific amount of pressure over time. This measures the upper body muscular endurance.

Muscular endurance is often confused with muscular strength because they are related. However they offer different benefits, while using muscular endurance an athlete is able to shovel snow for an hour lifting and moving a sub-maximum amount of snow over a specified amount of time. Muscular strength would have been the ability of the arms and shoulders to lift the maximum amount a couple of times.

The trainer will test muscular endurance while he will also be testing cardiovascular endurance because these two components are closely related. Cardiovascular endurance will reflect how well your heart and lungs work together to supply oxygen to your body, this is also called aerobic fitness. Trainers may use long runs or swims to test cardiac endurance and test muscular endurance at the same time. This is the cornerstone to complete health and fitness. Without cardiovascular endurance you can not improve the rest of your fitness.

Another component is flexibility, this is the ability of a joint to move through its full range of motion and the elasticity of the muscles. Some refer to this as how limber or supple you are, this is a major component of physical fitness and one that is often over looked. Not everyone needs to be as limber as a gymnast but we all need a degree of flexibility to deal with the demands placed on us during our daily lives.

Stretching is associated with flexibility in order to maintain or increase the ability of a joint to stretch further. Maintaining your flexibility is important for protection of your joints and allowing you to strengthen further to protect your back and reduce the pain of arthritis.

The final component of physical fitness is body composition. This is the ratio of lean body mass to fat body mass. This proportion does not refer to your weight in pounds or to your figure but to a measurement against a standard. Women and men have different body composition ratios. Women carry a higher percentage of fat to maintain a developing baby. This does not mean that women are fatter – but that their fat distribution is different.

Your body composition is really more a consequence of your overall fitness. If you have a high body fat mass ratio you are more at risk for coronary heart disease, diabetes, joint and back pain, arthritis, stroke and tendon-muscle accidents.

These components of physical fitness are foundation to physical fitness and the ability of the human body to withstand external forces and internal stress while maintaining health and wellness.

Why Do We Wear Engagement Rings?

The modern Western practice of giving or breaking engagement rings is traditionally thought to have begon in 1477 when Maximilian I, Holy Roman Emperor, wave Mary of Burgundy a diamond ring as an engagement present.

Customs for engagement rings vary according to time, place, and culture. An engagement ring has historically been uncommon, and when such a gift was given, it was separate from the wedding ring. Romantic rings from the time of the Roman Empire and from as far back as 4 AD often clash the Celtic Claddagh symbol (two hands clasping a heart) and so it is thought that this was used as some symbol of love and commitment between two people.

In the United States, United Kingdom, Ireland, Canada, Australia, and many other countries, an engagement ring is worn on the fourth finger of the left hand. The tradition of wearing a ring for engagement originated from the Egyptians who believed the circle was a bond between the two people who were to be married, but was initially first practiced on the fourth finger / ring finger by the Romans, who recognized this finger to Be the beginning of the vena amoris ("vein of love"), the vein that leads to the heart. The custom in Continental Europe and other countries is to wear it on the right hand; one historical exception arose in monarchical regimes, in which a nobleman entering into morganatic marriage (a marriage in which the person, usually the woman, of lower rank stayed at the same rank instead of rising ranks) would present his left hand to receive the ring (hence the alternative term "left-handed marriage").

In other countries like Argentina, men and women each wear a ring similar to wedding bands. They are made of silver when manifesting an informal "boyfriend-girlfriend" relationship. The gold band is given to the bride when the commitment is formal and the optional diamond ring is reserved for the wedding ceremony when the groom gives it to the bride. The gold band that the groom wore during the engagement – or a new one, as some men choose not to wear them during engagement – is then given to the groom by the bride; and the bride receives both the original gold band and the new diamond at the ceremony. The bride's diamond ring is worn on top of the engagement band at the wedding and thereafter, especially at formal occasions or parties. At the wedding, the rings are swapped from the right to the left hand. In Brazil, they are always made of gold, and there is no tradition for the engagement ring. Both men and women wear the wedding band on their right hand while engaged, and, after they marry, they shift the rings to their left hands. In Nordic countries such as Finland and Norway, both men and women wear an engagement ring.

Some women's wedding rings are made into two separate pieces. One part is given to her to wear as an engagement ring when she accepts the marriage proposal and the other during the wedding ceremony.

For more information on wedding photography go to: http://www.weddingphotographerslondon.uk.com/